Getting close! Glass is next! http://s598.photobucket.com/user/gfatula/slideshow/Whites%20windshield
Making progress. Figuring this windshield out and building it myself has been fun. Fitting the "Top Board" and the center front panel remain....
Thanks for this good advice. I will probably have a Shop here in Maine, that specializes in Lyman restorations, do it for me. I don't have the...
An unfortunate accident ripped the windshield off my 18' White skiff. The po tried towing it with its full cover in place and the wind's pull...
Hi, I have acquired a beautiful 18' E.M. White lapstrake skiff. It has been in storage for 20 years. Used very little. Pristine! One...
CDK, Thanks for the input. It seems like it should be a much simpler solution that the hot / cold, up and down the ladder to tap the shaft...
Gonzo, How do you recommend forcing the new "regular" coupling onto the shaft? The shaft is ok. Down
This is Moyer's coupler. [IMG] [IMG] I asked him about facing and fitting but got no special warnings about alignment issues. Why would this...
I am removing the coupler from my Atomic 4's 3/4" shaft. I am considering a split coupler to replace it. Don Moyer sells one for the A-4....
You guys built a solid boat. This one is a 1977. I have replaced a few things and re tabbed bulkheads in a few spots. I came into the boat by...
Thanks, Michael. Down
ABoatGuy, Thanks for the reply. Are you saying that this "washer" is glassed into the base of the stub with 3/4" of fg below it? The outside...
I need help evaluating what I see in this photograph of the inside, top of my keel. [IMG] The fg stub has a thick "sealant" layer above a 1/2"...
Apex1, I may end up with galvanized steel but Don Casey's approach, if done with the proper care, seems to address the ss corrosion problem....
Thanks Gonzo, I appreciate your warning. I am not concerned that what I intend will create any new problems. As I look into the bilge I am...
I have decided to add 4 "sisters" to the keel bolts in my Islander 28. I do not like the condition of the exposed bolts. They ring true. The...