Stuart Composites 954-648-1896 in Jensen Beach FL
Stuart Composites in Jensen Beach FL has capaciry in Q4 as well as 2024. If you need engineering, plugs, molds, or limited production parts we...
Gelcoat is going to be tricky but not impossible at all. Anytime you spray red either in paint or in gelcoat the underneath needs to be a uniform...
Who is the best US supplier for Hypolon and PVC fabric for manufacturing inflatable boats? I can't seam to find much when searching online. Thanks
I bought these molds with the intention of modifying and building a bunch of them. Life gets in the way and I've only built 1 hull and deck that...
send me info on tunnel hull to tagueestes@hotmail.com thanks
please send pictures to tagueestes@hotmail.com
email me my company is Infusion Marine LLC tagueestes@hotmail.com
please send pics of the tooling to tagueestes@hotmail.com I'm in S. Florida and would get them right away if condition is good.
50" and 24" wide Kevlar E-glass, 1 type is a 44oz quad, 2nd is a 22oz 0/90. Either material $15.00 per yard. Call for more info 954-648-1896
50" wide 8.9oz carbon fiber, 0/90 woven 12k 100 yard roll $1250.00 per roll. Can ship anywhere in the world. Call for more info 954-648-1896
pompano FL
mold is in nice shape for it's age. No deck mold Hull only. Located in S. Florida $3000 OBO Tague 954-648-1896 [IMG] [IMG] [IMG]
the bulkheads are bonded and then glassed into place. We rushed the glassing of the rear bulkhead so we could get the deck on to begin the mold....
[IMG] [IMG] it will get sanded again and then the final prime [IMG]
the resin for this boat is hydrex 100 here are some more photos [IMG] [IMG] deck gets glassed in and outside all the way around....
an infused hull and deck, glass and bonded together should be in the 450lbs range. Tague
here is the plug boat, it was not a copy of a mirage. Although we did start with a real boat and put thousands of man hours changing the bottom...
ready for transom and bulkheads [IMG] [IMG] hull is ready to get pulled [IMG] hull came in around 250lbs [IMG] I will post...
more core is being cut, bottom is 1/2 inch balsa and the rest is 1/4inch 5lb foam. [IMG] [IMG] more bagging [IMG] full vacume [IMG]