Another photo of Karmin Cobra Additional photos (prior to cleaning)
Karmin Cobra 1978 I believe after seeing the MK2 34' the hull shape looks identical to the cobra. This boat only has about 1 foot next to the...
I just bought a custom sailboat in port Charlotte Florida. It's name is "Kahuna" and I purchased it from the estate of a much older gentleman...
Ok...have totally stripped pontoon boat. I have installed a rudder from a 25 beachcomber, have installed 2 kick-up daggerboards simply attached to...
re last post Thanks for the input! When I used to fly radio control airplanes...my friend was always fine tuning his motor while I was flying...
re last post I was redundant in my posts as I did not know that my first post went through....I had written a good page and my computer decided...
sailing pontoon I have stripped my 20 foot pontoon to just the tubes and crossmembers. It has shed alot of weight. I have a single rudder which I...
You go for it!!! How do you think anyone ever did anything? They attempted!!! I am at this thread because I was planning on converting my...
37' Sharpie boat After dealing with broken ankle I finally began repair and painting....painted hull a slate blue and will add navy blue and...
Re 37' Sharpie This boat is a double ended boat. It is not sitting low as some had thought. When I bought it I re did the cockpit area as that is...
RE 37' Cat rigged Shapie I am not sure I am keeping the Sharpie. I fixed all rot in the cockpit and glassed it in. There is a small amount of rot...
Re Water Balast vs lead Unfortunately all the info I have is what you see. The lead is not attached..it is just lying un der the floor. I did...
Re 37' Sharpie in Tampa Bay Area I just sent a post that pictured a 2.5 4 stroke........I am installing a 25hp....not the 2.5 shown.
I have just purchased a 37' Sharpie 1971 era. It is 9' beam and I just found lead sheets under the floor and needed opinions. Currently the boat...
37 sharpie anyone that knows this design I would appreciate any info. I dove under the boat today to clean the bottom. It is a flat bottom but...
Re 37' Sharpie in Tampa Bay Area Forgot, the rig is not gaff rigged as the original poster thought. Is it called marconi?
Re 37' Sharpie in Tampa Bay Area I was not the original poster...after reading the post I realized it was the boat I bought. No, the boat is like...
Re 37' Sharpie in Tampa Bay Area I bought the boat mentioned in this post. It is one of the most unique boats I have ever owned. Rot never...