Thanks PAR,Im going for it.talked to a supplier and he said it should work fine but wet on wet may not turn out well so i will let the primer...
Does anyone know what I should use as a primer or if I need one for U tech 3.8 it will be sprayed over existing sanded paint and upol filler on my...
Cant wait,Thanks for the reminder Its still under the tarp on the left.Its going to be a blast.Ill post pictures when completed in about a mth.the...
Hello there.Got the transom all glassed and painted its done looks good,Left the hull red and painted the wings on the side silver and the top...
Found another shows hull.
Thanks BreathlessAk.90HP that would get the adrenaline going thats for sure.No separation between fore and aft that I can tell.I totally agree I...
The boat is under a foot of snow now, but I managed to get a little done this summer and heres my progress. I need a heated garage now to...
Are you saying for example I wet out 3 unwaxed wet layers of roven it will not bond without mat? Wouldnt mat have a resin rich layer to between...
Yes I didnt use mat under or over it just two layers of roven.Sounds like it would have been a good idea.Used it on my cruiser floor worked out...
TUNNELS I do agree the woven should be a tighter weave like the mid weight cloth I have its a real heavy tight weave,didnt have enough handy for...
I really should have put wax in the mix on my final layer but didn't have any and forgot to fill the hull with styro sm too before bedding the...
I had some left over from another project.I take it its not that strong correct?
The stinger on my speed boat is just curing now and I used unwaxed resin,can I just leave them unwaxed?I dont have any air dry here now.Can I...
Good thanks.I found Its a Glasspar G3 made around 1960.Haven't had time to work on it but wish I did, great boating weather here .Working on the...
The age of the boat is close to mine and those old metal fuel tanks start leaking and its a major concern if not changed and its a big job I had...
Hi it been awhile.I just purchased another project boat today and have no idea who made this little boat the previous owner said it was a race...
I hope you guys can make sence of this here goes. I have 3 gal of neutral gel coat unwaxed and 1 gal of white unwaxed to spray my boat.I mixed...
Thanks,good info,appreceate it.
Its all carved out (I wasnt all that bad, to late now).When I would lifted the cover it would drain coffee colored water out the bottom lots of...
I have coffee colored water running out of the bottom of the engine cover so I removed the fiberglass to get at the plywood underneath to replace...