Thanks Fish Stretcher!
Thanks for the responses on this. I was hoping for and easier more direct answer I guess. Something like .... when you infuse a part you add "x%"...
I understand the higher glass content ratio. Infusion is touted and saving up to 40% on weight. But if you just add back the weight with more...
I have successfully built a high performance boat using 1208/h 80/1208 with some additional reinforcement in critical areas. If I want to...
Cole, I'm not sure I understand your explanation but I have a good idea of how to make some, I just wanted to get some prices first.
Gonzo, I use 26# blue water Coosa.
I'm looking for a US supplier of transom clamps used for compressing the core material when building up the transom. Thanks in advance. Jeff
I used Arjay's 1041 light weight core bonding putty to vacuum bed some Nida-Core. I have a few gaps about 3/16" wide and 1/2" deep. Can these...
Gonzo, I'm not changing the structural elements in any way. The vinyl rub rail is purely cosmetic. It simply screws to the hull/deck joint. I...
Gonzo, No, the first layer of knit fabric behind the gel is 1208.
I'm looking into finishing the hull/deck joint to eliminate the rub rail. The boat is laminated with Hydrex 100 vinyl ester resin skinned with...
I'm looking for a US supplier for fiberglass chop with a tracer strand in the roll. Any suggestions would be a great help. Jeffrey
What about using the scored nida-core for hull sides in an open mold lamination. Do all of the score lines need to saturated with resin or is it...
I will soon be building single and twin engine outboard tunnels hulls. The boat in question is 21 feet long 7.5 feet wide and I want it to weigh...
