:) Acutally I was trying to define the cost of the equipment (cylinder, pump, etc) that I would need... But off course I would appreciate your...
thanks a lot for those precious information... Thats very important for me :)) now I can work on that.. Thanks..
One last thing then, is it better to have it deep or long ?? 50 depth x 40 long ?? or 60 depth x 30 long as you mentionned ??
ooppppsss sorryy hehe, please forget what I said.. just getting late here heheheh :)
I am not sure if I understoos correctly : My lateral plane area is 7 M2. 5% = 0.35 M2 0.35 M2 % 2 ( 2 rudder) = 0,175 m2 for each rudder...
Thanks a lot. This is exactly what I ment. I will probably need rudder effectiveness when maneuvring in marinas. My lateral plane area is 7...
Hey, I read a lot of threads about rudder area. My boat is a 37 feet lobster boat. I will have twin 150 HP on that. From what I read, I need to...
if you use two rudder, would that be 5% + 5% or 2.5% + 2.5% ?? thanks, just working on mine, but I will have 2 rudder for dual engine...
Actually then engine horsepower is drawed from the design hp/speed graphic. at about 270HP, I get about 18.5 knots speed. But I didn t buy the...
Hey guys, I am planning on setting up the electrical system of my new boat myself. The boat is a 36 foot wooden built riva/lobster boat type....
Would you guys rercommend I mix anything such as West Microfiber to the resin when applying the inner side of the boat ??
ok thanks, I never Heard of it ... hehe
Ok I think I get the point. Thanks... Richard there is one epoxy on the Turkish market called "Teknomarin" ERA 4000. Did you heard about that...
So when I start with the epoxy layers, would you guys recommend that I wait until each layer (resin layer only) is fully cured then sand it prior...
Good afternoon, I apologize for the late reply to all your posts, I was on a long flight away from Istanbul. It was a great pleasure to read...
Hey, Actuallly the goal is not to save money, I wasn t told of any implication created by having the two layeer epoxied together. I appreciate...
wooww thanks guys. That is a lot of good informatşon for me. Thanks a lot. Actually yes it is allready planked. So no way out on that :) but...
Thanks. Yes chestnu is like Oak, it is quite hard compared to pine. It has a much longer life. It is quite expensive, and used mostly on large...
I am currently building a 36' boat. I am planning to put two inboard engines in it. Probably 2x 160 HP. Can anyone recommend a good way on how to...
Thanks for your feedbacks. Here are some pics of the boat, and the construction type. The thickness of each layer is 0.5 inch. Epoxied togetheer.