By very thin body in the water I mean that you have two (or more) surfaces/plates which are very close to each other (or maybe it's only 1...
I am not 100% sure why you get this error but you can just re-mesh it may solve it, unless you have very thin body in the water ...
Initially I started to explain in detail what you need to do but then I stared to believe that you do not really know what fatigue life is ... I...
Advanced Marine Strucutres Design of Offshore Structures Ocean Structures and Matrials Strength and Vibration of Marine Structures
Maybe this one ?
vicmouse, have you estimated the boat resistance for the desired speed ?
Hi Leo, Somehow I cannot run the following ship ...
I don't understand very well what information you really want to see from AQWA as there is no sketch attached. But normally in AQWA all results...
Let me also try. This will be bit more technical. You slice the ships in frames (strips). Then for each frame (strip) your aim is to find the...
Hi Anum, Refer to this book - Ship Stability Powering and Resistance
I had an idea about the configuration just didn't know the exact name of it. While I was exploring the www and all class rules for fishing vessels...
Frankly I didn't understand your question, regardless of my education in Naval Architecture. The solely purpose of the bilge keel is to increase...
It depends what is the driving factor for the limit. It could be structural, functional and etc. Describe your problem in more details so we can...
This is what I hoped to understand by looking at few different designs. I intend to design a trawler for a friend but I don't have much experience...
Ike, many thanks for your reply. But it seems that I didn't express myself properly. I mean that I need a fishing trawler design, not a leisure...
Hi Guys, Do you know from where I can buy a 15m (50feet) trawler design ? If you also know some designs which are available for free also will...
I think that in the Maxsurf manual itself there was information and references about all these ...
Hi Todor, I believe that trying to reverse engineer the hull surface in NURBS or whatever other surface format is complete waste of time. Instead...
It seems that you are trying to cheat your homework by using ANSYS AQWA ? Who and for what reason will be interested in this curve if he already...
So much nonsense in one topic ... You will remove the forces from the tendons - this is hilarious ... Your TLP will capsize due to its...