Do the procedures like above an after change the form.
Several people asked me how draw a cat in free ship. 1 - design one banana (one hull without leak points). 2 - Mirror in Vertical plan d=0 3 -...
What formula I use to calculate thickness plate and primary and secondary members section modulus in Bureau Veritas rules for sail boats yacht?
After 10 years ago, I return. Professional BoatBuilder: Comments from M. G. Morabito about Van Oossanem - Chapter 6 : The Deeper Science of...
Scow It would be interesting see the heeled water lines from Scow,
" When heeled, a well designed chine gives a sharp trailing edge to the canoe body foil making it, for the reasons just discussed, into a much...
Mikko, Certainly. Arriving at the conclusion that there is an interrelationship hull / keel in the production of lift, where the hull...
My conclusions about the thoughts and conclusions of Dave Hollom: Well, it seems that someone finally agrees with the thoughts of this old...
I made a great little error, the correct name of the author is Dave Hollom, I pray he forgives me.
3 - “If we look at the hull and the fin and the rudder as separate devices that can each produce lift (side force) then you would be drawn to the...
David Hollom considerations are extensive, I will comment only the beginning and before commenting on the rest would like to know what you think...
Bob Wells sent to me the Seattle IOM Update Newsletter - september 2012 that I attached here. It contains thinkings from David Hollom about chine...
Daikiri Thanks for suggestion. I think that your knowledge would be very welcome to the classes involved in the RC, since, contrary to what you...
Videos from the first RG 65 with inclined waterlines as foils. Going great to windward: http://iomdesign.wordpress.com/
Nekst video: http://rg-andy.blogspot.com.br/2012/07/nekst-video.html#comment-form
[IMG]
You can open with Freeship version 3.28 + or more actual.
The figure has a poor definition. The stations are difficult to see, and has no defined measure. Defining the design for the water lines below...
The physical aspect of models and real boats is that the Reynolds numbers of both are different. Make a test on a scale model does not really...