Dang boy! 30 mph in a 10 footer. Be carefull!
Thanks everyone.
Dont you only fair the bottom? I was talking about the sides and inside of the boat. I didnt know you need to fair the whole thing. Do I need to...
Hey guys- I just finished putting my first coat of paint on my boat and where the fiberglass tape ends I can see it through the paint. All joints...
PS- a 15hp godevil/mudbuddy will definitely blow your budget. Buying a used one is a wase of time. They are all beat to crap. Try taking care of...
A 15hp godevil or mudbuddy would rock the world off a 14' jon. Anyway, if you go where a godevil will then your bottom will become splintered...
check out this: www.boatbuild2010.blogspot.com
It is on the blog www.boatbuild2010.blogspot.com thanks everbody!
Man- You all love this electrical stuff. I sure appreciate all the info and discussion. I'm just a simple redneck from Tennessee wanting to build...
Next question- wire size to switch panel from battery? Also- thanks for all the help!
Talked with a friend and he said (in lamens terms for me): Bulb watt/12= AMPS AMP x 2.5%= fuse size use 16G wire Accessories fast blow,...
Thanks guys for the help...however, I still need help. I have a switch panel from Seasense- A LED 6 switch with 15 Amp breakers that cannot be...
I am looking for a fuse holder that holds less than 10 AMP fuses. I have a 2.5 Amp and 5 Amp Im needing, HELP???
First- I did thank him on 2/09. 2nd- thank you
thanks kim. Th switch panel has reset buttons/breaker buttons for lack of a better term and also the on/off switches. Does that help?
Didn't think I would go airborne- just curious. I know it will float (it has over 1500 lbs of floatation in the pontoons). As for beating me...
The boat is also for flyfishing on freestone rivers my son and I fish. Therefore, Kevlar for the rub areas (thought it might help). Do you think...
Hey guys- I want to thank a lot of you for your past help (and future) with my boat building project. I have been blogging it for friends and...
Make sure you have a straight shaft weedeater. Attach a small prop to it (must be small because of revolutions). Make a 360 degree holding bracket...
thanks
