Too rich for me, but considering the price of these new someone should be happy to take them off your hands at that price. Do they have the ecu's...
How much are you asking for them?
I have had a 1.9pd from a seat ibiza cupra in my welded aluminum jetboat for 7 years and 1300 hours now with no issues. It is engine code bpx,...
I can't comment on the surface drives or the suitability of the hull, but I do have some experience with diesels and jets. I don't think you'd be...
I see no reason it shouldn't work well for you. I put a vw 1.9tdi in my welded aluminum riverboat turning a jetdrive in the spring of 2007 and...
I certainly wouldn't consider myself an expert, but I installed a vw 1.9 tdi into my welded aluminum jetboat 7 years ago now. Engine was from a...
CDK, the intercooler I am running is from frozenboost and the outer housing is all 1/4" plate. Can't say for sure what that thickness is on the...
With all the air to water intercoolers available these days online for cheap in just about every conceivable configuration, some for under $100 it...
I put a 1.9l Volkswagen tdi in my welded alumunum jetboat six years ago. Have put just over 1100 hours on it since then and been very happy with...
Yes there has been some cam failures on the pd's. There is an ongoing debate in the tdi community as to whether it is really a problem or not. VW...
Sounds like it should work out well for you Chris. If you find an engine make sure you get the wiring harness, ecu and throttle position sensor...
Well it's true that boats tend to put a much more severe load on an engine than autos do they also have the advantage of pretty much unlimited...
Chris, there are 3 main types of the vw 1.9tdi. The ve type are the older engines with a bosch ve (distributor or rotary style) pump. They came in...
Do they actually make you get your boats tested down there or can the homebuilder just building a single boat for his own use still get away with...
The boat is a home-built welded aluminum.18'6", .125 5456-H116, 5' bottom,10* deadrise with 12" pad down the middle,reverse chines, 32" sides,...
Anthony, mine has never been on a dyno. I am using impeller curves from the pump manufacturer and rpm to estimate horsepower.I take it you are...
Yes a lightweight auto diesel can work very well in a jetboat. I built an 18' welded aluminum jetboat in 1992 and put a Mitsubishi 2.3l...