this time the focus is to reinforce the boat's achilles heel: mast compression load bearing here are a few snippets to make you go to...
im finding the true meaning of the "2 years" answer in preparation for when ppl eventually ask: when will you finish. i sincerely hope ppl dont...
got more stuff done as always go to Introducing Katie-J - Plastic Classic Forum https://plasticclassicforum.com/forum/viewtopic.php?f=37&t=6357...
i partially kept one of the original cabinets, though i had its height decreased to make way for a shelf. this space will eventually house an AC...
i changed my approach to one of the V berth STB storage cabinets it was initially thought out as a 2 space cabinet but i decided to change that...
a few more shots from the latest works for more info go to Introducing Katie-J - Plastic Classic Forum...
some more work being done for more fotos & info go to Introducing Katie-J - Plastic Classic Forum...
closing the water tank lining the fwd section with the appropriate epoxy based product [ATTACH] laminating the lids as usual 2 layers of 400gsm...
peek into the future stb side cabinets cad plotting [ATTACH] after cutting the openings [ATTACH] lots more will have to be done until this...
thanks for stepping in and explaining your side of things. i get the copyright motive better than the racy one. IP is IP and it should be...
ok...so thats the reason why it disapeared! i still got to see her dont worry. And i really liked her, which must make me an post-progressive...
Well, you got me thinking about some elaborate countoring for the main hatch, but i really want to keep to a nautical theme. i really enjoy norse...
Hello Will Thanks for your kind words. Really enjoyed your art, thats some fine work there You are right about how iconic the main hatch of...
the refit continues! for more info and posts go to Introducing Katie-J - Plastic Classic Forum...
https://www.boatbuildercentral.com/product/console-and-pilothouse-plans/ im sure you can modify from these plans to suit your needs. its cheap...
and i still got time to scribble the lines for an additional storage unit to stb its final shape is still pending due to a decision i have to make...
building the port and centre B berth lockers decided to make it in one single piece. and this time it actually worked without incidents [ATTACH]...
cockpit floor hatches prepped the floor piece by taping it with pvc tape as a release agent used the original cutout pieces, cut the cloth strips...
got to cut the water tank lids to be glassed in the future also aft lid this is after i realized upon templating that a full piece wouldnt be able...
some morw work got done in the meantime i glassed in the under cockpit floor partitions, making ready to reglass the floor in the near future...