The teak is strictly cosmetic. I like the raised look of teak on the gunnels. So I figured I could glass divinycell approx. 3/4" thick to existing...
I am removing teak covering boards and do not plan on replacing them. I would like to add a layer of 1/2 or 3/4' divinycell H80 as the...
Par, I appreciate your answers to my questions. I was asking the gel coat question for information only. There are so many post were people are...
I understand Do not thin epoxy, You can put gel coat over polyester, but not over epoxy. Now comes my question, why can't you put gel coat over...
Mia Shipshape Boating had this product on there show this weekend. Maybe that will help you
Par The transom is 1 1/2" thick. The 1 is one piece of 3/4" . Can I put the 2 sheets of 3/4" together on the bench? or laminate wet at one time?...
I am going to bed the stinger in epoxy paste as recommended. I have a question regarding the transom. I was going to put a layer of 1708 on the...
MIA, I have 2 stringers on each side of the center line. The stringer closest to the center is 2"x12"x16' and the next stringer on the outboard...
Hello Par, I have a question with the stringers. I have a 2x12 and a 2x8 on each side of the center line approx 8"apart. I was talking to a...
stringers I have been reading the post on the 1708 so I called vectorply. He told me the 1708 would be good to use with the stringer and transom...
Good Evening Everyone, I attempted to upload 4 pictures and is was rejected due to size. How do I upload pictures of the stringers. Yes I can...
Hello Par, Thanks for your input. I will take Pictures tomorrow and post. I will see if Kamco is in the area
I appreciate the information you both have given me. The boat is a 20 CC motor runs good. I asked the same question about value to a friend of...
Hello, I have a 1988 Sport Craft and while I was working on the boat I noticed the fiberglass mat on the stringers was black, I began probing...