seven years later I wanted to apologize about this post. It is not a stupid design as the rest of the thread eventually showed. I just could...
Riverboy, Geeze, forgot I even posted this. No I haven't put any fins on. It's getting snowmobile season, so it will be next spring before any...
After I posted yesterday, I bought a second hand 6-7/8-inch impeller to try. Right now it's 6-5/8. My '86 Evinrude 48spl is a good runner but I...
tunnel design pics Here's those pics I promised. The aluminum plate the welder used is a little thicker than the original. You can see the air...
Jet tunnel Hey, if anyone on this thread is still interested, I successfully installed a tunnel on my old tin flat-bottom jonboat. I made...
Terry, I thought about experimenting by drilling and tapping some holes in some of my dive weights, and then puling on them, but never got to it....
Dang! Wish I knew that first. Well I'm not done; I have five more to do if I want to sister all the bolts. I can fix those. I guess I can pull the...
Just some more notes I thought of: The bronze(655 everdure) was very tough(impossible) to use a thread die to cut the threads with. We had to...
follow up Here's what finally happened. I ordered 3/4" silicon bronze round stock from Alaskan Copper in Seattle. Nice folks, They cut it to 12"...
next year I live far from the boat. I will only find time to build a model this winter and work at the real boat next spring. Will report if I am...
Thanks for the reply. I think I highjacked this thread. I was thinking that "correct in ballast placement" covered keeping VCG correct. I...
It seems a little drastic to careen my old bargain boat until it tips over just to see if will pop up again. So.. I've been wondering, if I built...
last post Thanks all for responding to this thread. I am much more informed about this and confident of the outcome now. I will not get to...
I am thinking now perhaps I need to pull a stud to confirm the thread size and if they are machine threads in good shape, then I should just...
Tom, The machines get shut off at happy hour:D wardd, It sounds just like drilling in uhmwpe—that stuff can grab you tool too. I like he...
Thanks again, I bet if Dick Valdes wrote up some notes and self published a book featuring all the old designs he worked on, he could sell one to...
Tapping threads is like approaching wildlife. It's not for the uninitiated, You must always watch for warning signs, back off when you hear a...
the keel I'm back. I was putting new shocks in the car so I didn't get a chance to look at the thread til now. Wow! some interesting input....
Yea, The thought of making a mechanical connection with something as soft as cheddar cheese is alarming for sure. But it seems that is what the...
recycled shaft I found out today that my machinist buddy has an old 1-1/4" bronze boat shaft that we will probably cut three studs from. We...