I am looking to purchase a new gelcoat spaying system. Does anyone have experience with the non-atomised versions available such as the INDy sytem...
After pulling a cured Kevlar/epoxy part from an infusion mold I need to trim the edges for installation. In an open mold it is easy to run a razor...
I have a two part mold for a 15 rowing skiff. It is split along the centerline. The ends of the mold are very narrow and deep because the boat has...
When making test panels with infusion I have consistently found the last layer of the laminate stack to be somewhat dry or light in resin. The...
I am hand laying 9 oz S glass on a dry mold surface and top-wetting it with vinyl ester resin. By using a bristle roller and sgueegee I can remove...