It is a matter of modulus the glass will give you the stiffness and strength required to hold the boat in the desired shape. Dynell is very...
2 Years ago I presented a paper on the cure kenetics of VE resins. First off the Dow Derakane manuel is a very good place to start. At first you...
Try north end composites in Rockland ME. I know they regularly mold consoles as I have seen them. Tony
Track Material I use 3M 5200 to bond the track in place. I have tries some MMA (Plexus) with some good results but the durability of the...
Ya: I agree this would be up there onthe limit for a plastic track especially if full battens are to be considered. I have been thinking about...
Thanks for the complement Thanks for the complement we are a small company and try to focus on what we do best. Tony
Matt: I know we are over th epond but your pound has a lot of purchas power here. We manufacture axially weighted carbon tubing utilizing a...
Hen: We buy an extrusion here that we post apply to the mast after it is built but this only applies to small spars (up to 10m) for integral...
