Yes a NuCanoe is a great boat I have one and love it. Mine is the 12' model and I am able to stand, cast, and bow fish from it that is why I went...
BW5 what is the gear reduction that you used one the right motor you built? nice job by the way
alot of them have been built right here in this forum under weedeater converions thread. many great ideas and finished motors from a large group...
My favorite quote is YOU CANT GRILL IT TIL YOU KILL IT!!!
lunatic nice job on the weedeater motor have you ever took a gps with you so you could get a speed reading
i have been following this thread quietly and watching this boat come to life and i think it has turned out damn fine.
Today I was involved in a guiness book of records attempt . It was to try to make the largest number of kayaks and canoes into a single floating...
im not a sailor or a good boatman but i think what he did was awesome. i have never been able to tell a good story about something i did safely,...
Sam thanks for all the info i really appreciate it. do you know what kind of resin/epoxy i should use for this project?
thanks sam i was going to round all the edges. using agles instead of curver just seem easier to build. as for the fiberglassing i am unsure of...
thanks kayaker this does help. i think i am going to use 2x2 lumber for a internat frame (for structural support) and then fiberglass the whole...
i am wanting to build a small pontoon boat, and i have never built a boat before or fiberglassed anything, but i do have construction skills i...
i think your all probably right to some extent. i am going to keep the motor as is for right now so i can still use it this year to go out on the...
i have a 1980ish 70hp johnson outboard 2-stroke. it has tilt and trim, and a side console, stainless steel prop kinda dinged up. does anyone have...
when the cavation plate is parallell with the water there isnt enough force of water riding over it to keep the prop in the water. that is why i...
i moved the cavitation plate back away from the prop a few inches which increased my speed to a whopping 10 mph. but with the cav plate moved...
pb, thanks for the info. i do know that a worn out 11x11 is way to big. a friend of mine has a factory built go devil it has a 24 hp honda on it...
the shaft is 72" so 24" or a bit more may be needed
erich longtail are direct drive no reduction, shorttails are belt or (gear box like prodive motors) so they have a reduction which lets you turn...
erich all bearings and bushing came from a company here in my local town which is called motion industries if you need it they got it. as for the...
