Its a nice looking mold, the boats run extremely well in our area its a desirable size, and no one has ever said the boats are not attractive. ,,...
I have been approched by a person wanting to buy one of my Hull molds, Having never sold one I have no idea what to ask for it, Its in perfect...
Thanks all !
its a 23' Center console power Boat
Thanks Fall Guy.. but we are looking to add 3' to a boat that already uses a bracket
Good afternoon , after many other projects I will be tackling this on in the fall,, thanks for all the fine comments,, and if you have more...
Hi folks I would like to open a discussion on transom coring. a transom must support a outboard motor in many styles and horse powers,, are folks...
for this job its just general Poly Laminating resin
Thanks for the reply Ondarvr, I follow you I have planed to use a 2- 3 mm core mat as well Fallguy, I have a schedule for the hull, just have...
Hi Folks I have a plug built for an 18' x 6' -6" outboard powered skiff,, My question is in using 2oz csm and 24 to 25 oz fabric who many layers...
The boat is a 15' skiff, and the console will have a mini coffin box I like the above suggestions My though in using the low density foam to form...
I have a new project where I am wanting to build a curb,frame or ring if you will to set a console, I will be glassing it to the boats deck ten...
I am looking for an affordable unit that will not cost an arm and a leg, yet effective Any thoughts?
Thanks,, I think with your help I may be able to save the part,, I had no problem or effort in releasing it form the Aluminum,, but I will hunt...
I have been at this awhile and had a problem with a hatch lid,, it is 20" x 36 here is what I did.. using a well waxed peice of aluminum and...
polisher wax remover Thanks guys I have always done it by hand, as the machine heat the surface,, I have a new hull mold coming along and I was...
Polishing or buffing after its applied to a mold
I have been told never to use a mechanical polisher to remove wax in a mold, can anyone tell me if there has been any technological break through...
still working on the design,, many are now going 36" aft,, I am looking into this to repower a 1962 Bertram 25
I have bagged a good many FRP parts, mostly hatch frames. ! My question is can the baby blanket breather be used as a bleeder or should I have a...