I'm sure some of you have seen this, but I just had to share. The elegance, the speed, the power. It's just awesome. I can taste it. It's the...
I have considered that. The mast is a rotating mast......(while sailing). That would get interesting, it would have to be removable, and then...
Old life saving boats were self righting through the use of self filling and draining ballast tanks. The Farrier tri's have been known to right by...
I am getting closer....... now working on a mast raising setup. On the trailer, ama's folded. It needs two things, a fulcrum and stabilization....
There's a download menu on the left on the aquatherm site. English is there, although the choices are still in German, the downloads are in...
Box with nitrile gloves....100 Grab a pair and throw it with the mixing stick and container when you're done. No goop on hands.
Hi Alan, thanks. I am on the DF users forum, it's a wee bit lethargic. I can try getting a hold of Jens, although I have heard he's not very...
Greetings. I said hello on another forum here, asking about foam. Then I found this, the multihull forum, that's me. Sold the mega mono and...
It's cheap, it's strong, it's easy to work with. If it gets wet, it rots.
What type of plastic is it? Fiberglass? Polyethylene? A picture would help.
The mechanism for the failure was impact. For example a boom hitting the deck, resulting in a crack. Subsequent water intrusion and the balsa core...
As I said: Too light an outside glass layer which cracked under impact of stuff and the perils of racing and what have you, a joint standing...
What's wrong with the original is that it is starting to come apart. As can be seen from the myriad of cracks in the deck the layup schedule was...
The hull to deck joint is loose, but not everywhere. In most places it is still very much attached. I'm guessing 10-15% is compromised. Because of...
Hi Rick, thanks for responding. Good to confirm my suspicions one more time. Roger the heat and the solvents. Neither will be an issue. Point...
Well I'm not sure why, but I don't seem to be welcome here. Sorry to have bothered this elite group.
Greetings....new around here and I see there's lots of reading to do, which is good as I have many hours to kill holed up in hotels on various...
New to this one, but not new to forums. I LOVE forums. People with a common cause from all over the world freely exchanging information. I am on...
