well ive already sealed it up with adhesive so that wont really be able to happen. on the other side its just basically a funny shaped chamber, as...
Before removing the lower unit on my 1990 yamaha 30, (30eld), i tried removing this part, and the screws were seized up so i ended up breaking...
Thank you for your help but hmm i dont quite fully follow you. "positioned in detents" Did you happen to find that manual? Thanks again.
Outboard is 1990 yamaha 30hp 3cyl, 30eld is model number. Ok so i pulled the lower unit, installed the water pump repair kit, and when i...
After i get it taken apart ill let you guys know the prognosis.. I stripped out one screw after the other two came out without a hitch and had to...
Huh? This is the control box I have: [IMG]
Anyone know if this is possible? My mid-80's OMC control box PUSHES the throttle cable out, but the yamaha i need it to control needs the...
got it running tonight, gonna complete the harness im making and gotta find a few peices for the cable attachment, other than that, should be in...
pist, can you look at that yamaha schematic and tell me which wires are which color? zooming in blurs out the color codes.
pist, thanks so much. The OMC schematic looks like a .pdf am i correct? if so could you email the file to me? Are you saying its on a disc and...
motor is 30eld. Control box has no markings at all, other than omc, heres a few pictures: [IMG] [IMG] Thanks for all the helpful replies,...
Ok so i got an OMC control box with a 10 pin red plug at the end, looks like this: [IMG] And a 30hp yamaha with no harness, but a bunch of...
Epoxy of some sort seems to be what ill be leaning towards. Gonna come up with a preliminary design and mock up out of cardboard tomorrow.
was towing the boat to its new home and one of the bearing packs inside the right side hub decided to take a ****. Smoke was spewing out into the...
So i decided on a design for the console. Wont be exactly like the one pictured, but thats the basic design im going for. Main difference will be...
dont think i'd want it placed that far forward, more towards the middle was what i was thinking. Did a little looking around, and want something...
Hey guys, picked up this boat yesterday with trailer, a 16 foot long with 6 ft beam 1988 Seaco skiff. Boat is in pretty good shape, fresh paint,...