Lol, that is the old stringers. I had previously Gelcoated them black, for Astetics. Those stringers are now cut out of the boat. The new...
In boats like mine, of my size and erra, it was and is common for the stringers to be covered or over wrapped with 1 layer of 7oz CSM and two...
Yellow jacket, thank you for that explanation. I do understand the tabbing process. I have always tapperd/ staggerd my tabbings, but never real...
I have an 18 ft Advantage Jet Boat and am in the process of replacing the stringers, bulkhead and transom. Question is on bedding the stringers to...
Attie, I think You are absolutly righ, about keeping it sinple. Maybe I have been over thinking a simple old school tried and true process. The...
What type of foam core do you guys suggest to use and what source to buy from. Please give me specifics names for the type of material. Is the...
Tunnels, if I understand you, I like the idea of what you are suggesting . However, I am a little dense sometimes. So just for clarification, are...
Tunnels, let Me see if I am understanding correct. Should the foam core be installed to only stick up from the hole, then sanded or faired out to...
John ,Your idea is exactly what I had in mind of doing, but I found that the flowcoat on minewas so cracked up that I neeed to go deepe, so I...
bulk heads Hey John, one thing that amazes Me is that Eliminator only resincoated all the wood bulkheads instead of covering them with...
The fiberglass hull thickness is 1/8" thick and the plan is to gellcoat the hull . So If I am doing the lay up from the outside, working with...
so I guess I will try to put a piece of thin plexiglass coated with PVA under the deck and lay up from the outside,
Should the layup be done from the inside or the out side?
I would like to hear opinions on the best method to go about relaminating this deck. Here is a picture of the deck that needs to be laid up...
Well I sent a p.m. to Brownie (Allen Brown, the designer,owner and builder of Nova Marine)over on Offshore Only. He said that Mine is a Wellcraft,...
A couple of the engines and drives. [IMG] [IMG] [IMG] [IMG]
I just inherited the Nova. It needs alot of work on the interior. Some one from Offshore only suggested that it might be a "Brownie" Nova due to...
'73 Nova 25 I have a 73 nova. My question is how can You tell the diffrence from a wellcraft Nova and a Nova marine. My registration is listed...
I want to do a complete tune up on My twin mercruisers. Can I just go to the auto parts and buy distributer cap,points and condensor,rotor...
Can anyone tell Me what temprature The mercruiser 188's should runn at? Would they run warmer just on the earmuffs than in the water? One engine...
