I've had some very good results with the Eppler 171 Could be worth a look with the other foils suggested. The are several foil data bases that you...
pictures
redrb, yes, also because the stern is pushed outside the circle relative to the centerline the vessel gets through the tack more often than not....
If the said tri turned about the centerboard the turning circle would be more like this with no other factors considered
Doug interesting comment about the boared fwd and then being able to tack. If it is the relationship of the board to rudder distance, you may...
Gary Baigent summed it up pretty well. Sorry James for trying to get doug to think about the whole picture as Gary B discribed. Glider Kilo Papa...
Surely you know how to work out the answer, so why ask the question. comments like 'wrong', 'not significant' sugest you already know the answer....
What are you really asking ? most people are primarily concerned with the vessel sailing balanced - hence the board position, turning is a...
But what about the fact that pic 4 has the centerboard off set from the centerline
Doug if you know how foils work, or in this case a centerboard and rudder you will know that they wont turn in the circle drawn, then you should...
that the laminate was not - substiantial enough - way back when Cooksons .... 'Mick' Cookson has said that about quite a few boats out of his...
you might also need to close in the back of the hull to get more aft buoyancy or it may well roll aft with the persons weight and try to go...
You must be kidding right ? No I've done enough sailing to know it does happen, Just look at the volvo footages if you personally haven't. Just...
Now now doug keep the emotion out of it. The spdrm link was from one of your posts. Google doyle sails cfd analysis speed dream. I long while...
I had a customer that had a 45ftr that he experimented with trying all sorts, it was great for me, but not for his sailing. He now owns a orma 60...
Just thinking of boats that hobby horse around, go down the mine, require lots of helm movement to keep em going.... Doug have you had any word...
Did a canting keel job a while back where the designers drew some fancy hollows in the hull fairings to try and get 55 degrees cant. It looked...
Here's a thought or two. Will your designer/engineer put an insurable warranty on the design/construction. In other words do they have liability...
I sailed a radical bay 8000 with the biplane rig for the day in Thailand. I have to say that I was quite impressed with it. It was very simple and...