you can do it, but if you want that extra space for felt its a little tricky. what you could do is put the felt in place where you want it then...
epoxy gelcoat can fade. If you gel it, one way you could do it would be to gel with poly gel, then next layer vynilester, then to epoxy, but that...
oh yeah, if you are going to use epoxy you are going to need to ramp up the temp of your part after infusion to gel the resin. otherwise you will...
I think i got the image in, you can do this, it works well.
epoxy paint is tougher than gelcoat too
technicaly vacuum bagged should get 55-65% fiber, infuse 60-70% if your good enough to get it to 70%, then pre-preg shoud be at 70%. So, that says...
Do you know how to do the inertia and moment calculations to tell you what coosa core thickness would be comprable to the 3/4 plywood? And, you...
wish i could remember the name of it, but when i was in highschool the folks had 42 hatteras and it had a toilet system that ionized and purified...
looks great.
same as above
ill post on other thread
I am in the Landing School composites program now. you start with the basics then go into practice. We are building a International Lightning...
one way you can do it is to build a box from foam insulation, put in electric heat strips, thermocouples positioned well for temp, and circulating...
This guy can help too. Bryan Duffey with Northern Fiber Glass 617-803-1143 bduffey@nfgsales.com
Surfasolve is great stuff and CWHayden is great too. The surfasolve is eviro friendly and cleans your tools perfectly. You can actualy clean a...
