http://www.designindustria.com/
Dear all, It was two years ago... Any way i am happy to inform you that we finally finished our boat in the middle of 2010. Right after, we...
Hello, I will be free to use same place for similar question. Does any one have an idea about this boat?
We were fully loaded with four persons on board. But you`re probably right because hull surface was perfect clear. After couple of days in water...
Thanks for reply. If I get the point you think that we have a good combination at the moment regarding engine+drive+prop. I would be happy to get...
Dear all, We have just finished testing of our 32 feet mahogany boat. Lwl=7.7 m Bwl=2.5 m D=4.4 t Engines&propulsion: 2 x yanmar 6byz...
Thanks for reply, I have also try to find it in ISO but without success. I found some guidelines in Germanischer Lloyd.
Does anybody know which part of ISO rules can help me to determine right anchor size for my boat. thanks
Thanks. I think so, but wasn`t sure. regards
Can someone please help me. I cannot determine is my boat fully or partially decked? L=19m B=5.2m It has only one master cabin. thanks...
Thanks, I will update you during whole process.
Dear Apex, Dear Wynand, Many thanks for your comments and help also. Everything went perfect without any problems. :) !!!
Like this http://www.megayachtnews.org/content/yachts/41-motoryachts/986-perini-navi-turns-first-vitruvius-hull.html
This is my idea.... I will update you and get some photos on Monday
At our first boat, we had 4 layers of epoxy and then 15 layers of varnish. But the problem was that when the guys do sanding between layers of...
One more
Here they are. The pictures were taken at Croatia coast and at river Sava in Serbia
I would like to show you couple of photos of our first boat so you can see what kind of surface quality we want to achieve.
Dear Wynand, I would really appreciate if you could send me some photos.
For Apex1: I am hard to imagine how to do a vacuum bag of final layer of veneer if the boat isn`t upside down. It is possible but much more harder...