These port visor's should easily solve your problem and they are reasonably priced. Buy these: http://www.seaworthygoods.com/store.html They are...
I recommend Bruce Roberts plans especially the 5 versions of the 434. He is very good at responding to your questions via e-mail within 24 hours....
Here is an excellent design: wood epoxy 434 at www.bruceroberts.com The photo of the white boat next to the garage is my build, launched in...
I built a 50' mono hull from scratch next to my home and then using crane & semi hauled it to a marina for final assembly. Building a cat...
I did not carry insurance during my build of a 50' sailing yacht. After launching I called BOATUS for insurance of a wood home built. No...
Par By the way, PAR, you are the only one talking about construction grade plywood. If you read my post carefully, you will note that I was only...
Par Your the one who does not know wood or rather you only know what the books tell you and have no on the job experience. There are absolutely...
I have been a lifelong water skier and pulled toys of all sorts behind boats. 70hp will have all the other boaters laughing at you. If the boat...
Marine plywood is not necessary If you really know your plywoods and grading you do not need to use marine ply. Here in the US you can go to any...
I became sensitized to epoxy I thought I was being careful w/epoxy but in the end I discovered I was not careful enough. I used nitrile gloves...
PAR I can't stop laughing at your answer to the budding yacht designer. Maybe he is not a bud yet but still a seed. I am still laughing !!!...
Gonzo Hi Gonzo, I see you live in Milwaukee, and aparently travel the world. What do you do for a living. I live in Green bay and I am...
I am just finishing up a cold molded (ply on stringers) 50' monohull and I did all the work myself. It was easy; however, I would think a strip...
Thanks for all the advice Submarine Tom, I just don't know what we would all do w/o your words of wisdom. You might be a bull in a china...
Apex1 why not tinting in the windshield? Apex1 could you explain why you do not even want light tint in the windshield? I am curious because...
Does anyone have experience removing 3M-5200 sealant that is fully cured. I need to remove it off my tempered glass and will try a razor blade on...
I need help finding a good place to buy fittings to fit a Racor 500 filter. I think the in & outlets of the fuel filter are 3/4" national fine...
Thanks for the link to teleflex. That answers almost all my questions. Have a Spiffy G'Day Earl
I have 2 helm statios on my new 50' sailboat that I am building. Can I use the standard cable controls or do I need to use elecrtonic controls....
Balloons---I don't think so! I am a commercial pilot and you couldn't get me in a balloon even in good weather. In a bad storm, I would rather...