Can you show us some pics of the demolding process? It would be nice to see the finished part. Thanks for your time making this video.
These guys have alot to choose from... http://www.themarineconnection.net/Consoles.html
Styrene gets excited under vacuum. Experiment and see what the bubbling point is of your resin. See how much you can draw on a clear jar...
Son, don't put that 9.5 hp outboard on that homemade 8 foot hydroplane... It'll be ok dad,,,,we tightened the steering nut so you can throw...
The salamander sat out in front of the truck box and was joined low with 8 inch steel duct. At the far end was a flue operated vent in the roof....
Once used an old U Haul truck box. Removed wood paneling on inside. Lined with duct board, then finished with 15 guage sheet metal from local...
Check out PDQ Yachts. The main problem that you will run into is in rough to moderately rough conditions, the props will be lifted out of the...
Did you get anything on the CSM before using it? What about storage...kept in a relatively cool, dry environment? Syringe might be a good...
"Each stack had its own vacuum pipe to its own unit and individual resin feed lines." You can get a "bag" fitting from Air Tech and try pulling...
The state registration numbers will give you the titled owner information, even if expired. Then you will need documents showing how you came...
I'm in boat plants all over the US and Europe and it doesn't look like anyone is doing anything until Feb or March 2009. Only those companies...
Looks great so far! Saw the same result you got in a plant in Naples IT. We (mouse in pocket !) determined it to be too much reactive...