Prop Size I have a t-10 prop on boat with a 52cc motor has anyone tried the T-15 or T-18. it is a 7 inch prop not sure if that would be to big...
Finally I finally got my motor finished didn't try to reinvent the wheel just used a 52cc motor honda clutch plate, fashion up a drive tube with...
Fuel Tank I bought a motor and fuel tank from scooter4less. I bought the 52 cc motor and the fuel tank with three attachment points. I asked...
Thanks for the help guys
This is the first that i have noticed anyone comment about this vary size in the aluminium shaft
drive shaft Sorry another question with the 52 cc motor. I see the much larger clutch plate and such on this as opposed to the 31 cc motor....
Shaft seals and bearing If you want a wall thickness of 0.125" and internal dims of 0.750", o/s dims must be 1.250". I can honestly say i...
Shaft, bearings and seals I ordered a 1 inch shaft with a .125 wall from discount steel believing that would give me a 3/4 or .750 inside...
Question I have located a 4 stroke 49 cc motor as opposed to the 2 stroke. Short of not having to mix the fuel and oil what other advantages is...
Questions I'm really interested in building one of these motors would like to do one of the 49 CC motors. But to be honest I have no idea what I...