I find it interesting that a 200' nearly flush-deck yacht needs a roll out back porch to set a chaise lounge on. I wonder what the thought process...
I'm sure there are a number of designers who could meet your needs but I believe (from following his writings for the last few years) that Tad...
Try this company. You have to request a quote but their replies are quick: http://www.maritimewoodproducts.com/hull.html
Eric Sponberg is good at answering a question like this - maybe he'll chime in but here's my take: If you're using a wood species that one...
Pylasteki: What kind and size of boat are you discussing? What is the depth and thickness of the oak beam and the thickness of the ply...
We usually have a backlog of work to rely on but the sudden cancellation of an upcoming year-long project causes us to be short of work this...
Boston: I'll take the box beam for $50. If I understand what you're doing, the oak content will be three times the cedar. See sketch.
Esprit Marine: Did you ever determine the cause of the damage to the rudder "housing" reinforcement? (I assume that refers to the top of the tube...
My experience is that a thin mahogany veneer on the surface (usually about 1/8") laid in epoxy over plywood with a plank width of about 1-7/8" and...
I have a 1958 35' Chris-Craft Constellation and I'm looking for a buyer who will contract with us to restore it to new condition. I don't mean...
With regard to what he referred to as a "medium-sized" hull's motion at sea, and its effect on the comfort of those aboard, he offered the theory...
MYK: I saw that boat in Charleston when I was there in July. My impression is that it didn't look as "fresh" then as it does in the pictures...
Well, I thought there would be a little more response to this inquiry. Thanks to those who did reply. I didn't want to influence the results...
I'm looking for available design ideas for a prospective project to build a one-off wood-epoxy daysailer for a client who is downsizing from a...
MM: I do a fair amount of work restoring cold-molded Thistles to competitive racing condition so I have at least a 20 year history with varnish...
Never mind. I found him.
Does anyone know how to reach N/A Paul Gow? Last known contact info was P.K. Marine in Moorpark, CA. I found their number easily enough on the net...
After doing a little math, I can accept the possibility that the Gulf could recover quickly because the amount of spilled oil is minuscule in the...
Exactly which industry are you interested in?
Boston: It doesn't sound like you've heard back from Tad yet. You can go to this link to see drawings of the interior layouts for Yellow Cedar:...
