Hi, Yes in Finland I imagine you almost spread it on your toast its so plentiful!but over here its pretty difficult to find. I did some more...
I'm based in Cornwall in the UK and want to buy Pine tar. The only supplier I have found on the net is Auson in sweeden. Has anyone managed to...
Hi, Yes I agree it is just a surface treatment, but what I wanted it for was give dent resistance to new 2mm poplar strutural venner and it...
Hey Squidly Diddly, Wow, I think I follow what you saying.... This is crazy stuff! So if I pressurize the wood in a chamber before painting with...
Test results- In short the vaccum method did the job.... brilliantly. Thanks for the help as it really wouldn't have occured to me to use this...
I did a test peice, by heating the wood, applying warmed epoxy and the heated it further still, I did this a second time then let it cool and...
I did a test peice today in the way I described in my last post and am waiting for the epoxy to cure. The vaccum is an interesting idea and now...
Wow thanks for all the feed back! I am trying to gain dent resistance rather than over all strength of the wood, but am reluctant to use a cloth...
This is a bit of a random one, but I want to reinforce soft wood with epoxy to make it harder, the wood I am using is poplar and is 1.5mm thick....
Hi Wet feet, Thanks for the reply. I have also been advised a polyester mould may not be suitable for an epoxy moulding because of the shrinkage...
Hi. I want to create an epoxy moulding but am not sure the best way to go about it. I have made polyester moulds and mouldings in the past, but am...