Thanks Rustybarge That's a good link which gives good detail to some issues I was not aware of I have to admit I have not read the installation...
Yes Sorry I missed that detail in your previous reply it looks like Naiad are considerably cheaper than the rest at 36.5K AUD + gst without the...
Hi Brian Did you fit 7.5 sq ft fins?
Hi Eric My Offshore 52 is the Taiwanese build and will cruise at 8 Knots with 1450 rpm with a maximum of 16 Knots we are in remote northern...
I am thinking of fitting fin stabilisers to my Offshore 52 we do long distance cruising at 8-10 KNOTS all the manufacturers i have looked at...
I fitted 2 Whale pressure pumps one for freshwater and the other deckwash the freshwater pump leaked internally and rusted out the bearings and...
I have finished Euro 1000 to fit out stage basic construction took close to 1000 hrs by a profesional boatbuilder at my workshop second fitout and...
Has anyone formed their own bow rails I have 1" stainless steel tube and a tube bender but not a former any Ideas?
I am building a 10 metre Roberts steel Euro 1000 which I was going to fit with direct glazed toughened glass windows until I met a boatbuilder who...
I have built a Roberts 10m Euro and am looking for information on zinc annode sizing and placement does anybody know any sites which can help with...
Daiquiri I have built a Euro 1000 complete to the blast and paint stage which was cut locally from the cd plans and everything fitted well I would...
Thanks for the help what is TSP?
Is it ok to use a galvanised pipe as a radio and radar mast bolted to a steel flybriddge on a steel boat same goes with a fully galvanised davit...
Has anyone built a RO watermaker I cant justify spending 7-10K on what is a fairly simple unit.
I am building a 10 metre Roberts Euro 1000 in steel and am looking for a drawing for a suitable heavy duty bow roller design as most of the...
I am in Darwin send an email to richard@winnelliehydraulics.com I will send you some photos.
I will send you some photos and can offer plenty of advice its a much bigger job than is mentioned in the Bruce Roberts study plans the assembly...
I am currently building a Roberts Euro 1000 FB in steel and have not been able to find any photos or ideas for the fit out I have finished the...