Thanks for that. I've re-ran my lines to be a German sheet setup, runs along the boom to a soft shackle on the gooseneck with a block attached...
Well I've changed my sheeting around abit. It's more German sheeting style now, going to a block next to the kicker and back down and to the cabin...
Hrm, that's an idea. I wonder if I could do a boom gallow/traveler setup which would also allow me to reduce clutter up front as the main...
I do want to mention, by end of this year I'll have finally finished making my stack pack, so the sail will be sitting above the boom rather than...
Just got back in service so apologies for the delay. As for existing setup, we have a track on deck, boom is mid sheeting with 3 single blocks...
Hey all I've been pondering this idea about building a hard dodger for my unique companion way (think swan style but worse). The hard dodger...
I'm not a designer at all, but have some opinions for whatever they are worth. Take it with a grain of salt but figured that i should provide some...
Hrm this is a good point. Something i should think closer about. Wont be hard at all to add a strip of tabbing and some holes for things to flow...
Over the years i've slowly been ripping out sections of cabinetry and replacing the bare plywood with new plywood thats painted and/or epoxy...
Wow now that is an idea i never thought of. I'll ahve to look around at camping and maybe yoga mats. I'd probably have to glue the adhesive ones...
Hey all, Winter is starting to really show its face and now that i'm living on a mooring ball full time, it appears condensation is starting to...
Hey all, I have been tinkering with ideas on how to design a new exhaust riser to inject water at a later stage which will in turn prevent the...
I unfortunately only have the weight of the glass and the total weight after cured. I did not think about weighing the resin before:( Weight of...
Title says it all. Trying to figure out the resin to glass ratio on this new mount I just made for my windlass.
I used this stuff on my boat in the cabin top area. The existing furring strips place were 1/2" thick and I made cedar planking strips. These were...
Thanks! The whole thing will just be lightly sanded and probably just painted white(maybe gelcoated). It will all live under the locker while the...
Thanks fallguy. I haven't had to deal with moulds yet, but I was thinking i would overside it and then trim after the fact. Thanks for the...
Hey all I am looking at making a "pedestal" which will be used to raise my windlass up out of my anchor locker roughly 10"(give or take) so that...
I agree that I need to double check that sizing of drains are correct but regardless it doesnt solve the fact that the leaks are occurring due to...
Currently aboard SV Osprey, we have 4 dorade boxes, 1 on port, 1 on starboard, 1 split between head and passage between saloon and vbirth and one...