All that plus money to view one video. The internet really is dying.
Video blocked in the USA
I haven't weighed mine. A member on another forum was told his weight (6600lbs) while the boat was hanging in the travel lift slings. I remembered...
I've been looking at cradles and trailers to keep my sailboat on. The boat is an Alberg 30. The displacement is 9000lbs/4,082 kg. The boat is an...
It seems you're looking for someone to back up your idea. I can not do that based on the parameters you outline in post #114. If you want a...
A 9hp outboard on a bracket would run shallower than side-mounted paddle wheels. A Paceship isn't very big or overly heavy like a full keel boat.
True and I get what you're saying. Very true and dampening those motions as much as possible is my goal. That makes perfect sense. I can...
Not as designed. I'm trying to get a grasp on using ballast to keep the boat steady and on her lines. Yes, weight at the ends will cause...
The boat is a modified Teign gravel motor barge design. The ballast is need because there will be no payload and to keep her on her lines and...
1) This barge has soft chines not hard chines with a fine entry and carries her tansom above the water. Yes, it's flat bottomed but the bottom is...
You guys over-complicate this. Everything I have is on the plans except layout,where to station ballast, and the actual amount of ballast...
I am about to start building a motor barge. The center section of the hull is somewhat flat. There is some shape with round chines. The ballast...
The pics I posted are the designer's specs. This is good to know. Thanks. They will be weekend guests from time to time. Probably overnight or a...
Thanks. I like that cabin reconfig. I have the basic layout pretty much done. I'm just hoping to spread things out a little when I start on the...
Semantics. I'm just looking for a quick and dirty cabin design. I'm not liking the original cabin look. I need more forward for the V birth and...
Here is my boat less cabin. I'm looking at ideas for a cabin for long-range cruising. I don't need much back deck. Enough for a couple chairs and...
The system has already been sized doing the fluid calculations. I need to know what type of pump a helm pump is. I know it's a rotary pump with...
It's a 28' cabin cruiser with a Beta 38 diesel inboard, full displacement hull (17,000lbs roughly) with a 16 x 24 plate rudder. I just need to...
I've been reading, a lot. In preparations for building my boat. In one of Buehler's books, he mentions using off the shelf industrial/commercial...
Go here and click on "start a conversation" to send him a personal message. CDK https://www.boatdesign.net/members/cdk.21722/