To my surprise I have the opportunity to take ownership of a 40 ft mono hull fibreglass mould to make my own yacht . It’s a well known design from...
so I had to repair a hull of a boat I made , sanding down almost to the glass material , so needed to spray a new gelcoat layer over the hull and...
after pulling a boat out of the mould I experienced little air bubbles popping out of the gelcoat in patches only in the hull. Hand layup with...
Im super excited , manufactured a plug out of foam made a great mould everything went well , sanded the mold surface down to 2000 grit and used 3m...
Hi all Any one got techniques in adding in intricate artwork into gel coat in the moulding stage ? I've played around somewhat with stencil art...
Hi all Was doing a hand layup with 2 layers 225 gms/sqmtr of CSM and one layer of carbon/ Kevlar and trialled using cork as reinforcement using...
Hi all I have redesigned a boat ( plug) by shaping with bog ( bondo ) and now need to get coverage over this so I can spray tooling gel coat...
Just wondering if any one has done any in mould changes like adding new bits to a mould rather than manufacture a whole new mould ? I have an...
I currently hand lay sea kayaks and am investigating if going infusion.Currently the layup is in the deck 2 layers of CSM and one layer of cloth...
I have manufactured a kayak mould and found getting those last sanding swirl marks out very hard and frustrating. Does any one have any tricks...
Any one got a sea kayak mould's for sale? After cutting edge designs Thanks
Any one have seakayak moulds for sale-- urgently want modern design seakayaks ,also willing to listen and pay for the right design that hasnt...
Willing to pay top dollar for commercial moulds for seakayaks --please PM me if you ahve any for sale-must be good design :) Thanks