I would like to reduce the amount of fairing work on my 3 piece boats that have no glossy smooth inner liner to cover the raw bumpy inner sides....
I have a pilothouse catamaran is running 50 mph with twin 225 outboards with 25" shafts. The motor is all the ways down, and because she is light,...
Looking for reference material or suggestions to help me design a sealed deck over bulkheads in a 28 x 9'6" FRP power cat. Have incorporated 2...
I have a 28' symmetrical power cat that has no rocker. She likes to run around 40 mph in calm or rough conditions. I would like add about 5-6" of...
I put this on the materials thread for 3 days with no response, so I'll try here to see if I can get more attention. After washing newly molded...
I used the search function here and on ytube to no avail so I am hoping someone might have a link or a methodology to build 40mm thick 2 sides...
Its my understanding that the straight keel lines of a planning cat should incline between 3-4 degrees up when the hull is under power on plane....
Will this work if I roughen fresh cloth and coosa surfaces with 36 grit and clamp and use a 1/4 notched trowel to spread paste? Epoxy is 12x as...
Appreciate any tips you might have. 28x10' power catamaran
I have added resin and talc to my plywood plug and the hull is now 90& true after sanding with long sanding blocks. I have some small pinholes I...
In Mexico, all the suppliers in town are buying Reichhold Polylite and thinning is with a monometer prior to activating it with cobalt. I suspect...
Are certain blends of this base resin better than others? Which gel coats or barrier products best to use? If polyester is unsuitable, would you...
I measured the static waterlines forward and aft on a 26' Power cat I recently purchased and the differences at rest surprised me. The rear of...
I own a 22 Seacat Catamaran and this is a pic of her rear sponson. The hull is getting about 2 mpg at a 25 mph cruise, and light boat tests claim...
Anyone have an idea what it costs per square foot to produce a 31' power cat hull from plywood then the sq foot cost to fair and wax it than...
I have a 22' Seacat Power Catamaran that will not run at WOT at less than 6-8 degrees, even when the motors are trimmed down excessively. The...
I am looking for a bilge setup where one 2" pickup feeds a sump where a lot of small livewell pumps can be installed to feed multiple livewells...
I am looking for the recommended hull transom angle for Yamaha outboards 115-225hp, and find nothing when I look at the oem's stuff or google....
I have designed a 24' aluminum dual console monohull using 2d line drawings. The boat is very simple with about 11 panels and since I do not...
1st post here. Meant to say displacement forward, planning aft. Looking for your thoughts on a new to me concept for designing power cat...