My boat is far too heavy to plane with 6hp, so to go 13 knots, how long is it? ;) 94'? ;) http://www.youtube.com/watch?v=Yo2PtXj_OIQ For me who...
More plans: http://www.payneyachts.com/motor_launches.htm
If Damen holds a patent on this concept the details WILL be available. That is how a patent works.
The two boats fom Hannu are not of similar size or weight, the punt is about one third larger in all dimensions, so about 2x the capacity. 2...
If you want your fishing boat to be stable, you probably want it to be quite wide, and then it will not "run" that great with a regular Minn Kota,...
Thank you for the info. I am thinking about using reverse as forward, to get the 1,86 gear ratio. Since it is a 10 hp /3000 rpm engine it...
On this gearbox, with a different ratio for what they call position "A" and "B", can I choose what is now used as reverse to be forward, with a...
Since you want to cross an ocean in a 4' (!) boat (other thread); just get a German fridge, remove the shelves, remove the door or make sure you...
Some scetches would be great. Why make it so short? You may want to lie down after a while!
Is that last "fact" boat related and open for discussion? If so, any references to start with?
600 hp and 6000 kg, probably not very low CO2 emission.
How to do the nesting and get panel dimensions? I'm talking about bottom and side panels for a simple dinghy. I'm only able to do the transom and...
The design from bateau.com is very similar to this old design, free plans available:...
Knut, that is one awsome home build project you linked to. The hulls are based on 110 cm tubes, 2 x 340 hp gives 17 knots, the owner built it...
Most 25' home built houseboats do not look (or sail) "like the Nautitech 40". I think you need to be more specific if you are to get any help...
Eric I did not realise that the .jpg files with frames is what you sell as a "full set of plans" for a 46' trawler yacht. If it's that quick...
It's not free plans, it's 100 USD for "plans" by an amateur who asked for help here. Nothing but the advise he needed was supposed to be free....
photos
Thank you all for the nice comments. I did not count the hours. The basic hull came together in a couple of days, not so with the rest…Working...
