Wow, I guess this is due an update. Hard to believe it's been this long. We couldn't lower the motors without cutting an already low transom...
Juneau
Tunnels, deep tunnels bring the fear Penn-Yans to mind. So I agree with your point on limitations. Hopefully research will dispel/avoid this....
Another canceled flight, this weather pattern should be over tomorrow. Thanks for the interest in my project. It's a pretty big bite but should...
Flight delayed due to fog so I have some time. Tunnels you're getting ahead of me. I do understand to big picture and how involved it will be....
Thanks for the replies. The question was motivated by a repower project. I have a 27' Farallon with an 250hp 8.2 Detroit that will be replaced...
Did you check for sticks or line in the jet; intake grates, shaft, stator?
I know I could make it myself but hoped someone had the tooling and I could buy some premade. It would take a heck of a lot of grinding! i don't...
Sorry, I think you guys are right the first pic doesn't have a stepped transom. After thinking about this for a while I think the SeeVee 32 in...
What's the benefit of this design? I'm particularly interested how in functions with a small tunnel/ prop pocket. [IMG] [IMG]
I may be a little late responding but if you can't make your Bayliner perform satisfactorily and are looking for a different boat both trailerable...
I need to build a new strut for a boat I'm repowering. Can I buy foil shaped SS plate capable of handling a 380 hp diesel and a 22" wheel? What...
Ad Hoc that's a very good question one that's not easily answered because who wants to compromise! Seriously, the real question is: Can the...
Thanks for the replies and links. I do a lot of salmon trolling as well as trap fishing for crab and shrimp. How would a surface drive handle...
I have a question concerning shaft angle and prop efficiency. Would it be better to have a small tunnel/ pocket or a flat/ delta pad and reduce...
Charlie, I have mostly Hamilton experience the largest a 105' quad 422 Hamilton with 825hp each 35 knot top speed. I've been maintaining them...
What year is your motor. I have one for a '63 to '89 short shaft that is collecting dust.
Check your fuel fittings, you could be sucking air or the fuel pump is tuckered out.
Hi Manie, I'm shopping for brackets. I think your thoughts and other real world information I've heard is probably correct and worth trying....
I've seen it used with stone laminated to it for reduced weigh counter tops on high end yachts. Our company has purchased premade table tops and...