hi there, i have a 10meter motorboat, with a perkins 4236 75 hp that i intend to fit in it. i plan to fit a python drive, but not sure what mounts...
hi there, i need to replace the gunnels on a 34 ft grp motorboat. They are currently oak, but rotten. Whats the best wood to replace them with,...
hi there, i need to replace the gunnels on a 34 ft motorboat. They are currently oak, but rotten. Whats the best wood to replace them with, oak?,...
hi there, i have replaced longitudinal stringers in my boat and this time glassed them in ( over 3/4 inch marine ply) . Originaly engine sat...
hi there, i need to get hold of, or make a large boat hatch big enough for my 175 horse inboard to fit through. I have extended the cabin, and now...
Was working on structual bulkheads on a 34ft motorboat whilst it was in tidal waters and was advised by all you people to get it out of the water,...
Hi there, am working on a 34ft nelson( motor boat) thats in tidal waters. Am replacing all bulkheads including longitudinal ones. Are they best...
Hi there, i,m extending the cabin on my 34ft motorboat, how many layers of 450g csm should i use, need to walk on the top on it after! Cheers
Hi there, i have a Perkins 6354-t, 180hp, want to fit it in a Nelson34, the engine bed is attatched to marine ply 3/4 inch, am not sure if this is...