Ok so thats what a zip cut is. I was using those when my plasma cutter went down but I got it fixed now. I can cut a little cleaner with a zip...
Thanks Frosty. What is the water for? It seems like quenching it would cause it to warp more?
Here is the link to go with my previous post....
VanDeStadt Plans I used to own a VanDeStadt 34' in steel built by Doug Knight a contributor to the book Steel Away. In talking to Doug about...
Here is what you will eventually have to deal with if you go with a wooden deck. As far as structure goes it is not as strong but how strong does...
How is the project going Greg? Any recent pics? I'm finally making some progress on mine. Thanks for your advice on patching. Sean
Thank you everyone. As you can tell I haven't checked this thread since the last time I posted. Ironically I was googling for advice on how to...
No matter how old this thread gets please reply if you have any opinions based on experience. I am not going to start this project until the...
Thanks for the advice folks! Murielle is right. It is all toe rail. I might try a 16" patch first and if that does't turn out well then I can...
Thanks for the link to the film. It may take 30 years to implement new technology but there are always the early adopters who show others the way...
Thanks for the informative responses. I was about to go about this all wrong. I would proceed to cut out a 16"X16" chunk of my hull and try to...
Hi all, I have a 35' steel cutter with a glassed over plywood deck. Overall she is in good shape but some time ago water made its way between...