I have been exploring electric clutches for the bigger motors, I found 2 that would work for the direct drive style longtails, and several 1000...
Here is the location of the plans, with the requests picking up, I found a host site. Hybrid Boat Mini Longtail Plans
2 wires should be the kill switch, single is the starter wire.: Here is another progress picture: [IMG] Prop pictures: The large prop...
Couple of sites I just found: Kipawa Propeller Trolling Motor Parts
Mark it is off of a Shakespeare trolling motor, a guy gave me the motor and it was so rusted up, I had to cut it up to get the transom mount off...
Here are some progress pics of the 52cc: Muffler adapter: [IMG] Reworked choke: [IMG] Swivel/Mounting Plate: [IMG] Lucky find...
Here are some pre fiberglass pictures of the boat with the motor: [IMG] [IMG] [IMG] Mark, I like the exhaust, I had planned on...
I just got a call from Lisa at Duropower, now they want me to keep the 33cc and let them sell me a 52cc at 1/2 off, they have.............they...
I cannot PM you, so email me at darrylecash@sbcglobal.net and I'll send you a phone number. I am in Northwest Fort Worth, over on Eagle...
Monster Scooter parts, I just ordered one, shipped for $136 with the transmission, add $13 for the fuel tank and some other miscellaneous parts,...
The electric start is available on eBay for next to nothing, it fits between the pull start and the motor, I want to say I paid $24 shipped, this...
Duropower is a joke at best. I ordered a 52cc motor off of their website, and after that pain(you have to fax a copy of your card and id, to...
Scuff it really well with scotchbrite, then use any flat Krylon flexible bumper paint, it comes in several colors, or you can just buy Parker Duck...
It sets upright in the water, flat side down with the prop facing down, it draws water in much like a grate on a jet ski, and forces the water out...
The tiller cross block is off of a John Deere weed eater, I bought a handle kit with throttle, cross block and a bunch of other stuff off of eBay...
Here is my post from the Refuge, I thought I would throw it up here, I am building my boat, and I am getting close to completion, I just wish John...
John, That is a heck of an idea, Thanks for the info
It depends if your current "kill" switch is an open or closed circuit. Check it with an ohm meter to find out, then we will know how to proceed.
For a universal mount, go back and read John O'neal's posts, he used a trolling motor bracket that is slick and fairly easy. I have one, but...
Are you talking about a safety tether/engine kill switch?
