I need to make some spacers for deck hardware and thought UHMW would be perfect. My only concern is that it might weep "oily stuff" that would...
I plan to use west epoxy to laminate two pieces of this wood together. Is this a good way to do it? .......do I need to thicken the epoxy and how...
Our current project is building teak and maple sole for the sloping parts of the fiberglass hull in our boat. In order to get some of these areas...
Where we live there are no suppliers so I will have to mail order it. I need about 30bd/ft of 1/4" thick x 3 inches wide....the pieces need to...
Yesterday I painted my nonskid with 2 part interlux perfection. I mixed way to much and have a quart or so left over. Can I use this left over...
I have a teak and holly sole that is glued (epoxy I think) to plywood to form the sole. 2 of these pieces are removable to get to the bilge and...
Well we painted out hull over the weekend - for the most part it came out pretty good. There are a few spots where the pressure in the gun must...
I'm in the process of installing a new motor and exhaust system into my sailboat. My concern is the distance from the high rise exhaust where the...
I need to purchase a sander like this for sanding into corners and other awkward places. Does anyone have a recommendation for a sander like this?...
Apologies if this has allready been covered. How am I going to paint the whole deck and cabin in one shot while maintaining a wet edge? Or do...
I have sanded a fair bit of my boat with my RA porter cable tool. Of course, there are areas I cannot get to with the power tool such as at the...
Need to get rid of the oxidisation before painting. Thanks for any help
What paint should I use as a "marker" paint? I have spent hours washing down and scrubbing the deck and now I need to sand. This paint will show...
I have what is probably a dumb question about a new electrical installation in a sailboat. There will be 2 batteries (house and starting) an...
Can I use this as a release agent with west systems epoxy? I understand a release agent to be something that won't stick to the epoxy as it...
This is for a porter cable 6" da sander (hook and loop 6 hole) The sandpaper I buy at Ace hardwre is hopeless. Thanks for any help
Has anybody used this combination for painting a fiberglass deck and cabin? It appears that this might be easier to use than the awlgrip...
I have purchased a Westsail 32 that needs the deck repainted. So I need to sand the entire deck before applying primer. Can somebody suggest a...