Are these products (Polypropylene) really brittle in the cold? Say a small 10 ft boat, subzero temps - hits a rock. Does the internal core...
PAR, I sent you a private message. Thanks, idkfa. Serious looking panels.
check out the Hybrid duck boats...google it. He's got a 10 ft version that can be stood in without any problems. I'm wanting to build a...
Thanks, gentlemen. A few years back I tried to buy some core material from Bateau and the guy there told me to forget it, the boat (an 8 ft...
Thanks gentlemen, Eguven, Thank you - let me work on the various lengths - I will get back on that. Tunnels - I pulled the laminate out of...
I built a small boat and would like to make it in a vacuum bagged FG+carbon laminate and do not know where to look for reference material to learn...
H, Thanks for the link & the compliment! R
Thanks, Alan. I was told the same thing about the core cell, keleg-cell, foams. The weight is mainly from excess resin, I don't know enough to...
Okay, I built this little boat: [IMG] For ease of description - 10 ft long, 36 inch FLAT bottom, 44 inch max width. The sides have a 45...
I made a fiberglass john boat by using another john boat as a male mold - came out alright.
Tunnels, I bet that you have forgotten more than I'll ever learn. It's fun to do things differently than others and succeed - it takes a lot...
I love the nut case comment. :rolleyes: Not everyone wants to do things the way "everyone else" does. Let the man work. I don't have any...
J, The fact that you building a little boat or a big boat doesn't make much difference. The wood will soak up any water it can get its fingers...
I'll go with the Bataeu recommendation. FL12 I think it is. We fish out of boats very similar to the 14 ft version - pretty high sides (20...
Thanks, JEM. I've experienced that cloth moving and sure it isn't easy to get everything back the way it should be. My experience with 4 oz...
Thanks, Matt. I'll relax the thought of heavier cloth on the outside. My first question wasn't worded correctly. Is it okay to put the FG...
I've recently stepped-up from 8 ft boats to a 10 ft boat. It's made out of inexpensive 1/4 inch ply and glassed with 7-1/2 oz tape (double taped)...
Its one of those "always try to do better" things. I designed the boat over several years of building similar boats (8 ft boats) - always...
I haven't been around for a while - however, just built another small FG & plywood boat. This one is 10 ft long, 44 inches wide, and weighs about...
Hey, This was one of my lessons in life. I was naive and thought I would "get an answer from the guys who know" and it didn't work out like...