Dear Gonzo and James, Thanks for your valuable comments. I think, I got a guideline here, which I have to work a bit more. Thanks again. Cheers...
Gonzo and JamesG123, Thanks for your response and pardon me as I could not explain my problem clearly. First, I started with testing marine...
Good day everyone, I am working on the establishment of EEDI for inland cargo ships of Bangladesh. In the process of the establishment, I need to...
Dear all, I am currently doing my Ph.D research. The research is basically implementation of EEDI (Energy Efficiency Design Index) and developing...
many many thanks for your kind help
I understand your point regarding EEDI. I have been talking with some experts during my M.Sc thesis as well like Professor Stefan Krugar or...
Jamie Kennedy, Thanks for your message. Please check your PM for more details. regards, manon
Adhoc, Thanks for your response. About EEDI: In order to control this CO2 emission from shipping, International Maritime Organization, IMO...
hi, I am currently got myself admitted to PhD at my native university in the department of Naval Architecture & Marine Engineering. My M.Sc...
Captain D, I would like to help with autocad and rhino. Plus I am a Naval Architect with 7 years of exp :). Let me know if you need my help. my...
daiquiri, I think you hit the main point of speed loss. The water draft from the surface varies from 4-5 meter actually. any way, I am going...
Yes, you are right. BAR should be around 1. Now I want to have the following configuration: D=1320mm Pitch= 1169mm BAR=1.0 GB=2.54 With...
Current Pitch is 1100 mm and dia 1300 mm and Engine reaches its rated rpm
TANSL, Sorry for the late reply. The vessel was trialed again with ballast water to submerged the full propeller. (Note that, at the light...
Off course I will let you know the result. For the time being I am uploading some pictures if it helps to understand the shape.
TANSL Thanks for your valuable comments. Large angle stability of the hull seems okay of this hull, maximum GZ occurs at 30 degree. Actually I am...
Please see the attaced drawing for the propeller and the skeg shape. Also please check the stern shape of the lines. Do you think the propeller...
Thanks for your comment. As I have told the owner to trial taking more ballast so that the propeller get enough water. Trim looks suitable at the...
Engine rpm= 1000 water depth around 4 meter.
Dear members, Please see the attached body plan. L wl X B X T = 47.37X10X2 (Extreme B/T is due because of the draft limitation). Displacement...