I will soon (in a month time) be infusing my first large piece, a 33 feet (10 meter) sportfishing boat hull in a female mould, and off course I...
Since gelcoat, to avoid microporosity must ideally be applied in three layers first 0.4 mm thick plus two others at 0.2 mm for a total of 0.8 mm,...
I will soon be doing my first large part infusion, a 33 feet boat hull, we will use vinylester infusion resin and have a big doubt in regards to...
I am involved in the construction of a 33 feet sportfishing boat which we plan on infusing, but a new “doubt ghost” has appeared: I have always...
A friend of mine has a 35 footer 1977 Striker sportfishing motor boat, and he is bitterly complaining about the fact that whenever cruising...
The prices of scored foam (cuts in the surfaces to allow infusion and better fitting to compound surfaces) is mega high when compared to prices of...
Hi to all, I am building a 33 feet ( 10 meter) boat hull mold and will soon have to face the covering of the plug with tooling gel coat, So far...
I did cover a male plug with VE tooling gelcoat recently and I hope everything went along nicely ( I have not popped out the mold yet), I did it...
What is in the opinion of you ilustrated forum colleagues about the very best gelcoat in the market ?? naturally in terms of weather resistance...
Reading our forums, I came across this product called spherecore made by the speheretex brand, I have read thoroughly their website and found...
Yes, with those uncertain times I would say it could be appropiately called an adventure, before someone says it, yes I have started the same...
Dear boatbuilding interested colleagues, when building a oneoff (no female molds here) , for example our typical CC , please imagine you have...
Dear colleagues I will soon start the build of a oneoff boat which will be made with corecell core and bead planks and I have the following doubt...
Being in the market looking for a nice and beautiful 31 cc, I came across Cape Horn Boats which I found particularly attractive but reading their...
Dear boatbuilding colleagues, I am a “soon will be boatbuilder” living in the Canary Islands – Spain who will soon start the adventure of...
Being a person that always think about the whys and why nots, I wonder about the justification for the rearmost step that most builders of large...
