Can anyone clarify that this is correct? I have a 1960 Evinrude Sportwin 10 HP that runs great. I want to swap it from a 1960 Alumacraft 12'...
I currently have a 1960 Evinrude Sportwin 10 HP on a 12' 1960 Alumacraft Vee puddle jumper. It runs great but the boat is a tad too small for two...
Your initial best bet would be to post photos here. The crew is very adept at identifying most UFOs (Unidentified Floating Objects). We love a...
You can check Bass Pro Shops or Cabela's catalogs or Google Springfield Boat Seats, they make a wide variety, otherwise you may have to go custom.
You could try Glen-L I think their Bonanza runabout had an aft deck over an inboard/jet/I/O powerplant - drivetrain. If not, I have a very good (...
Go to Google groups, Lone Star Owners group, sign up and look in the album section. They have images of virtually every Lone Star Catalog/Brochure...
If the height angle of the exhaust pipe from the the elbow to the hull is close, simply use a rubber exhaust flap on the thru hull fitting and...
Perhaps some professional designers can weigh in here, you are talking about an estimated gross weight (4x or more) than the weight of the bare...
Well for one thing, that chine log with the big knot in it will probably have to go, you need (mostly) clear lumber for that piece, I would remove...
If you can, go with a 351 or 400 "Cleveland" block. It has angled 4 bolt mains, better lubrication, (bigger)canted valves and good availability of...
Did I miss something or did you say a fiberglass hull weight of 2500 lbs for a 36 - 37' foot boat; how are you going to do that? Inquiring minds...
You might google "Springfield Products" they are large American manufacturer of all types of marine seating. All of the reclining back-to-back...
For the grating try customcompositesok.com Didn't see the photos before I posted, I gotta wonder how that happened? On the bottom side of the...
I would dry scrape any and all loose paint using a "Bahco or Sandvik' carbide scraper (they are the same and both have orange and black handles) I...
At first guess, sounds marginal. There is a huge post on 'IMP Boats' under "Powerboats" check it, out there are many knowlegable owners there.
I had not priced it recently, yes that is steep, the alternative is to paint as suggested and perhaps "DriDek" open mesh rubber snap-together...
I have mentioned this several times in reply to similiar posts (but no one has dared); have you considered (in addition to your framing repair...
Try Perko, Tempo or Taylor-Made as starting point; measure the exisiting tank size dimensions and geometry and see what will work.
Why the obsession with the inboard? For 2-5 hp look for a Cruise 'n Carry, Tohatsu or even a Briggs & Stratton. For the boat you need, an inboard...
1969 Camaro Z-28s made for Trans Am racing (my dad had one) had 302 c.i. displacement; I believe they ran 327 pistons with 283 c.i. rods for an...