Thanks. I was just thinking if the tunnel horisontal ared had the same function as a delta pad but with lift seperated from center to give better...
I just found a pic of a Penn Yan hull with a tunnel. This 33ft hull should have a max speed of 28knot. But what is the advantage of this tunnel....
Thanks, but please explain what 239rc mean. I have got both service and installation manuals but no info there. Where did you get the info from?
I intend to isolate start battery, so dont care about AH but only how many CCA needed. Also i want to save weigth, so think the Exide Nautilus...
Suzuki DF300 manual recommand a 135AH battery but no info about cca. I intend to use two separate batteries but with a switch between (and extra...
A coaxial cable will pick up noice like an antenna. Balanced cables might be the solution. Also check that all grounding/earthning is made with...
Sorry for the confusion, should be insulation. Danish bagger is correct, im from Denmark, means this is my 2nd lang. Anyway any good advice thanks!
I intend to isolate a new aluminium boat bco heated cabin, so looking for some advice/comments. First. OK to just isolate the bare aluminium or...
Here is a Hull with similar design. The total weigth will be approx 2500kg. The target is a smooth ride in coastal water and a little windy...
The hull as a delta pad type. Most fwd frame V is 40 degree, 2nd is 32 and 3rd is 26. Wonder if this allow let say 20-25kn cruising still...
Good point. Do you have an idea if 40 degree V Forward will slam or target should be 50 to give a smooth ride in choppy sea
I am looking for a drawings for a approx 25' fast cabin dive and fish boat with a modified transom for diving acces and a heavy ladder and a 300hp...
I have some theories about minimizing the welding width, means carefully TIG weldings or alternatively MIG followed by grinding and polishing of...
Wow, thanks I belive most models is calculated in calm water, but most of the time I will be in some waves riding with 25kn. I belive each wave...
good point, tks. Does any have a rough idea of the % increase in mpg or top speed for the 15/20 degree?
I consider a 26 feet cabin cruiser aluboat (precut) trailerable mainly to be used inshore and in calm to medium rough sea and powered by a 300hp...
