Thanks for the reply! I'll write David as soon as I can.
I just bought a boat that has sat in a barn for awhile (20 years) and prior to that it hadnt been used much. So I thought I could ressurect the...
Ive picked up a really old Old Towne canoe that needs some restoration. Its covered in a nasty yellow substance thats not paint and is pre-epoxy...
Wow, thanks alot. Glad I joined in on this sweet forum. All Ive been hearing since I joined was - "That project is too difficult" - or "You...
Bah........I work with 6 servos all day on one machine(robot)......on a 600kg robot in a foundry. 20000 hours mean time between failures. If I...
Why not? Too old for new technology? I should add that this is for an inboard.
Ok most new motors are already digital throttle control...............and since i'll be buying a new motor this wont be a problem......... what...
Im have just recieved my plans for the Glen L riviera. Im now in the budget process and developing a timeline for completion of my rig. I call it...
Couldnt you just pop your hull surfaces into FEA like COSMOS(Solidoworks) or Ansys and get all your structural data from that? You can make your...
There are some remenants on ebay all the time. This is where I get my cloth. The resins I get from US Composites. Overall, it really isnt that bad...
Both are pretty nice.......I prefer the sportier look to the cabin cruiser but I respect them both just the same. I like the glen L because its...
WOW thats amazing! That center inlay must have taken forever to get perfect! All of those boards are trimed up and rounded off AFTER theyre glued...
I kinda thought they were just screws with washers............but it seemed like an awful lot of them. All those holes with filler in...
[IMG] This picture baffels me........everything is dotted with those metal deals. What are those? how do you get rid of them so theyre invisible?
Thank you ALOT. I was just looking for some guidance on where to look. Im going to the book store tonight to try to find the most comprehensive...
Heres a couple more questions...... This boat was built with a single layer of plywood. All around. Only 1/4" thick. Im pretty sure this wasnt...
thank you for the explanation. I never knew the cloth came out invisible. The only experience Ive ever had with fiberglass is the stuff on my dads...
Im a newbie. You only use fiberglass cloth on the surfaces you plan on painting correct? Otherwise, you wouldnt get the pretty wood shine. Am I...
The register indicates its custom.........no make. The former owner has been deceased for some time so Im not even sure about getting the plans....
Ive got this POS boat thats been sitting in my dads yard. Can anything be done with it? I do know the wood on the outside is useless. And Im a...