I have a mahogany trailered power boat project on the go. I am considering striping the old bottom paint back to bare wood. Applying 4 coats of...
Robjerc On the installation that is in consideration. At some time in the normal operation (large seas) the vessel will have water above the...
Daiquiri, Yes I can see the value with the vented loop and do not question its use. My point is if the direct discharge is at the same level...
I am not sure this is in the correct section but here goes, if not then suggest what section to pose the question. I have a large volume...
Thank You Many thanks Olav for the clarification. Jack
In the process of ordering a new mast for my boat. I have supplied the mast builder with the sail plans that I obtained from Sparkman & Stephens....
Thanks for the advise
I am wanting to paint my Bronze strut and Skeg with epoxy primmer. Question can I paint the primmer on the Bronze or do I need a metal primer...
Are we talking about the same boat Tynaje, Thanks for the input. Are we talking about the same boat. The boat I am talking about is built by...
Why not use Penetraing Epoxy Thank you all for the input. Question PAR what is the down side to using penetrating epoxy prior. Jack
Epoxy verses Vinylester I have peeled the old polyester gel coat off my boat. It is now very dry about 2 years out of the water. Will start...