All the best top my many friends here, I have not posted for a while, but still read every so often Kind regards. John
Daniep, Hey mate, I am a shipwright working around Manly Qld, I know personally a very good fella that may help you with your venture here. Send...
I have contacted you direct from your web site, thanks for the introduction to your company. Ta, John
WE still use and can purchase monel, one of the best fasteners available here.
Thanks so much for all that mate, have installed to your directions exactly. Fingers crossed it lasts many years. Thanks all those that...
My plan was to use plastic strips stuck to bottom of tank and then stick it all into the underfloor compartment I have just rebuilt and glassed...
Hey fellas, Looking for the latest best practice for the installation of an alloy petrol tank in a fibreglass runabout. More specifically,...
Merry Christmas and Happy New Year Yep, all the best to everyone on the site.
Simply put, the ratio of a pulley system is found by counting the number of falls from the moving block, so if it has three ropes that move then...
Thanks for that insight Chuck, all the best.
Happy New Year everyone, may all your dreams come true. Love to all, John
Sound like simple vacuum bagging really, but you have to use current date resins, and check the hardener too mate as old stock sometimes does not...
Hey fellas, Does anyone have a set of lines plans for the old World Bank/Yamaha panga style boat please, about 23 feet. Just returned from...
I actually epoxy the concrete, just mask up the area, then use the 5200 adhesive, never failed yet that I know about, so continue to do it.
Hey mate, I have completed the job now and it works fine. Installed a BEP electric battery switch as the main control switch, switched on by the...
Negative returns Hey mate, The diagram is very simplistic, but actually OK. The negative wire shown from the battery does in fact go where it...
http://www.bepmarine.com/home-mainmenu-8/productcategory-301/no-meters We use these type here, they are very good, now available in the USA as...
The repair of this sort of damage is not simply building up again as you see in the temp repair, the inside of the boat has been damaged too, as...
For taking the lines off a hull in the standing position, I have ued successfully a ladies dressmakers tape, you get them in different lengths, so...
Hard to know without seeing it mate. Some of them pump sea water in and overflow it out, some use the forward motion of the boat to fill it and...