Attached (hopefully) is a diagram of how I think I should connect four 12v batteries in a parallel / series configuration to A) get 24v to the...
I have a detail I could use some help with... I have a series of hatchs from my pilot house sole that open to the engine compartment. For the...
I know I'm opening up a can of worms here and have read many threads in t hese forums discussiong similar matters, but thought I'd ask you guys to...
I could use some input / suggestions regarding chain locker design for the 46 ft. motorsailer I have under construction. I plan to carry 150...
A minute of your time if I could… I’m gathering the bits and pieces for my fuel system and could use a couple of pointers. So far I have two...
I got a great deal on some 24v equipment, and since I hadn’t totally committed to 12v, I elected to purchase the gear and go the 24v route. My...
Does anyone have an experience using DE (Diatomaceous earth) as an epoxy filler? I ask as I have a bunch of it (used as a swimming pool filter...
Is there a generic equivilent? I need to bed my engine stringers against a composite hull and at the same time, create high strength epoxy...
Has anyone had experience with the Shaft Saver product? If so, what do you think? http://www.shaftsaver.com/newpages/demo.html Regards,...
I’m trying to lay out my drive line for my 46’ motorsailer (new construction) and am coming up with a million questions. Hopefully you guys can...
Guys, I'm stumped on this one...The hull of the 46' motor sailer I have under construction is really flat at the lowest level of the bilge. I...
I’m starting to conceptualize the wiring for the 46’ motorsailer I have under construction and am somewhat at a loss when dealing with 12v wiring...
Suggestions please. So far, in the design and build of my 46’ motorsailer, I’ve been able to provide lift our access to all of my tanks…except...
I would like to set up the diesel tanks on my 46’ motorsailer so that the port and starboard fills are connected to a common manifold, enabling...
I could use some advice on the keel for my 46' motorsailer currently under construction. The keel is a lead filled steel form. The steel form...
I have a small Honda gasoline generator that has an aftermarket auxillary gas tank. The set-up replaces the factory supplied gas tank cap with a...
I am interested in hearing the opinions of this group on the virtues of different roof cambers. My project is a 46' motorsailer to which I am...
Project: 46' motorsailer (based on modern canoe body, composite hull), under construction. I want to add bulwarks in lieu of an aluminum toe...
Guys, I have a keel attachment similar to one that can be seen at: http://www.apm-keels.com/ (go to "keels" / "high strength fixed keels" and...
I am purchasing a 50 gal drum of Proset 135 epoxy along with a 15 gal drum of 229 hardener. They mix at a 100:31 ratio. This pump has been...