Nice boats and designs, id like to see 30-32ft long with a 6.5-7ft beam. 60-80hp diesel engine, cruise 12 knots+. A "FL 26" elongated basically...
I never thought about hinging the rudder, thats a good idea. I would have thought someone would have removed a keel from an old sailboat and...
Here is some pictures of the hull. The boat supposedly weighs 8000 lbs with 3500+ lbs ballast. 28ft long 9.5 beam. If i removed all the sailing...
Cant be trailered or launched.
Basicaly i had two ideas, attached photo is my first idea. Was thinking since the macgregor26 power/trailer/sailer powers ok without turning...
Boat has a 20hp diesel, suppose to go 6knots, 30ft long, 10ft wide (a bit too wide id think). Remove the keel, upgrade engine to 40hp. Shouldnt...
I believe the 26x and the 26m is the hull you should focus on. If i remember right both are very close in design, the "M" has a slightly more V...
I saw somewhere sombody was tilting a 8.2ft+ beam, 34ft long into a container. I may have been one of the taller containers though, id need to...
I like it. I would decrease the beam to no wider then 8ft and leangth to 30-32feet.(tight fit into cargo container) and possibly a little taller....
As far as quality/durability of the mono hull macreggor and similar boats is not important, its the hull speed. The upper cap could be...
35kw-40kw electric motor is all thats needed for 25knots You can do all the research you want, it will most always be wrong. You can use as many...