Hi Folks; Here is my friends update on his 4-108. For those mechanics/engineers out there, our problem turned out to be a sheared bolt...
Hi Fred; I didn't make myself clear. Have one engine and 2 sending units. Did an oil change and had no effect. Thanks for you input. Bob
Hi; Have a rebuilt Perkins 4-108 with about 400hrs on it and yesterday on the SC ICW the alarm went off. Had less than 10lbs oil pressure on...
Shaft log Hi; In my 27 ft wood sloop I used heavy wall copper tubing. It went thru about 24" of oak. One end of the tube was fitted to...
Hi Lloyd; I didn't do the change over. The carb I bought on ebay appears to be from a 87 6hp. Though Bombardier/ Evinrude parts list the...
Hi Redtech; I stumbled on to this website http://epc.brp.com/default.aspx?brands=ej&lang=E&dealerlocator=no and found the carb that...
Thanks Redtech
Hi Redtech; I removed the 6hp carb and compared it with the one I bought as a 8hp. The throttle plate bore and the choke side bore were alike...
Thanks Redtech. I really appreciate the encouragement and the info. My 2 cycle knowledge is weak but I have rebuilt a couple of small gas...
Hi Redtech; Thanks for your reply. I have aquired a carb, fuel pump, and reed valves. Reportably from an 8hp Evinrude that seized up after...
Jack; Thanks for your reply. It's the same displacement motor and it appears to be a de-rated 8hp. I use it on my inflatable and it will plane...
I was wondering if anybody knows what I need to do to modify my 6 hp to an 8 hp. Thanks